Mon–Sat, 9:00–18:00 (GMT+8)OEM & private label welcome
Production

How to Choose the Right Candle Wick: A Practical Burn-Testing Guide

By Ember Candle Factory Editorial TeamPublished Updated 7 min read

Key takeaways

  • Wick choice depends on wax, vessel diameter, fragrance load and dye.
  • A correct wick gives a full melt pool in 2–4 hours without excessive flame height or soot.
  • Always test in the final vessel with the final fragrance and colour.
  • Document results so production can repeat them exactly.

Two candles with the same wax and jar can burn completely differently because of one variable: the wick. An undersized wick tunnels and drowns; an oversized wick smokes, overheats the vessel and creates safety risk. Here is how we size wicks during development.

Common wick types

  • Flat braided cotton: curls as it burns, good self-trimming; common in tapers and pillars.
  • Square braided cotton: sturdy, suited to beeswax and pigmented candles.
  • Cored cotton (paper or cotton core): stands upright in container candles; widely used in soy jars.
  • Wood wicks: give a crackling sound and wide flame, need precise sizing and wax compatibility.

The variables that change wick size

Vessel diameter is the starting point: wider vessels need larger or multiple wicks. Fragrance load (often 6–10% in container candles), dye concentration and wax type all change how the fuel feeds the flame, so a wick that works unscented may be too large once fragrance is added.

Our burn-test method

  1. Pour at least three candles per wick size, using production wax, fragrance and dye.
  2. Cure according to the wax type (soy usually needs longer).
  3. Burn in a draft-free room, on a level surface, at least 8 cm (3 in) apart.
  4. Record flame height, melt-pool diameter and depth, and any smoke or mushrooming every hour.
  5. Run burn cycles (for example 4 hours on, 2 hours off) until the end of life, checking vessel temperature and the final wax remaining.

What a good result looks like

A correctly wicked container candle reaches a full melt pool to the edge within about 2–4 hours, keeps a steady flame without flickering smoke, and leaves little wax on the walls at the end. Pillars should hollow slightly, keeping a protective wall rather than dripping down the side.

Safety standards to consider

For the US market, ASTM F2417 covers fire safety of candles and ASTM F2058 covers safety labelling. In Europe, EN 15493 (fire safety), EN 15494 (product safety labels) and EN 15426 (sooting behaviour) are the main references. Build your test plan around the standards of the markets you sell into.

FAQ

How do I know if my wick is too big?

Signs include a tall or flickering flame, visible black smoke, carbon 'mushrooms' on the wick, a very hot vessel and a melt pool that becomes too deep too quickly.

Why does my candle tunnel?

Tunnelling usually means the wick is too small for the diameter, or the first burn was too short to reach a full melt pool.

Ember Candle Factory Editorial Team

Written by our production and export specialists in Shanghai, who develop, test and ship candles for B2B buyers worldwide. Questions? Contact us.

Related articles

Contact Us

Get a free quote within one business day

Tell us your product, quantity and destination. You'll receive pricing, MOQ, sample time and lead time, plus practical suggestions from our product team.

Send Your Inquiry

Fill in the form and our sales team will reply within one business day.

Reply within 24 hours on business days